A cleaning SOP (standard operating procedure) is a written document that tells your team how to do one kind of clean, step by step, so every cleaner does it the same way. A good cleaning SOP names the area, the order of the work, the supplies and chemicals, the safety rules, the standard for "done" and the photos that prove it. A cleaning company with many clients keeps one base SOP and adds a short page for each client.

The 8 parts of a cleaning SOP

Write one SOP for each area (kitchen, bathroom, bedroom) or for each type of clean (turnover, deep clean, move-out). Each SOP has the same 8 parts.

ScopeThe area and the type of clean. "Bathroom, turnover clean."
Who and whenThe role that does it, and the time it should take.
Supplies and chemicalsEach product by name, what it is for, and where its safety data sheet is.
SafetyGloves, ventilation, products that must never mix.
Steps in orderTop to bottom, dry to wet, cleanest area to dirtiest area.
Standard for doneA photo of the correct result, not only words.
ProofThe photos or video that the cleaner takes before leaving.
When something is wrongDamage, a missing item, no supplies: who to tell, and how.

The "standard for done" is the part most SOPs skip. "Clean the shower" means different things to different cleaners. A photo of a finished shower, from the same angle that the cleaner will photograph it, means one thing to everybody.

A sample SOP: bathroom, turnover clean

This sample is for a vacation rental turnover. Change the steps for your products and your clients.

SOP: Bathroom, turnover cleanRole: cleaner. Time: 20 to 30 minutes per bathroom.

Supplies

All-purpose cleaner, bathroom cleaner, glass cleaner, toilet bowl cleaner, microfiber cloths (one color for the toilet only), toilet brush, gloves, trash bags, towels and toiletries from the restock kit.

Safety

Wear gloves. Turn on the fan. Never mix bleach with ammonia or with acid cleaners.

Steps

  1. Take the before photos: the wide shot from the door, and a photo of any damage.
  2. Remove the trash, the used towels and the bath mat.
  3. Put toilet bowl cleaner in the toilet, and leave it to work.
  4. Spray the shower and the tub. Leave the product to work.
  5. Clean from top to bottom: mirror, light, shelves, counter, sink and faucet.
  6. Scrub and rinse the shower and the tub. Clean the drain. Dry the glass.
  7. Clean the toilet: bowl, seat, lid, tank, then the base, with the toilet cloth only.
  8. Mop the floor, from the far corner to the door.
  9. Restock: towels set, toilet paper, soap, shampoo, trash bag in the can.
  10. Take the after photos: the same wide shot, plus shower, toilet base and towels.

Standard for done

No hair, no water marks on the glass or the faucet, no marks on the mirror, towels set as in the reference photo.

When something is wrong

Damage or a broken item: take a photo, and report it before you leave. No supplies: report what is missing and how many.

For photo rules and a shot list for each room, read how to take before and after cleaning photos.

One base SOP, one page for each client

A cleaning company that cleans for many property managers cannot write a new SOP for every client. Keep one base SOP for each area and each type of clean. Then add a short client page with only the differences. The client page is where most complaints start, so it must be exact.

Base SOP (same for all clients)Client page (different for each client)
The steps for each areaItems the client stages in a fixed place: guest book, welcome basket, decor
Your products and safety rulesRooms or closets that the owner keeps locked
Your photo shot listExtra shots the client wants, or the checklist in the client's software
Your standard for doneThe client's own standard, if it is stricter
How to report a problemWho to tell at the client, and how: software, email or chat
Restock stepsThe client's supply levels and where the stock is kept

Write the client page with the client, at the start of the contract. When a client complains about the same thing twice, the client page is missing a line. Add it, with a photo. If the client uses Breezeway, the client can put reference photos into a checklist template. Breezeway notes that a reference photo added to a template should apply to all properties, so put property-specific details in your client page. Read how reference photos work in Breezeway.

Chemicals and safety data sheets

Your SOP names each chemical, so it is also the right place to say where the safety data sheet (SDS) is. The OSHA Hazard Communication Standard (29 CFR 1910.1200, published at ecfr.gov) has three rules that matter to a cleaning company:

  • The employer keeps a copy of the SDS for each hazardous chemical, and makes the sheets readily accessible to employees during each work shift. Electronic access is allowed if there is no barrier to immediate access.
  • When employees travel between workplaces during a shift, as cleaning crews do, the sheets may be kept at the primary workplace. The employer must make sure that employees can get the information immediately in an emergency.
  • Some consumer products are exempt: a product used for the purpose that its maker intended, when the exposure is not more than a consumer would have.

This is a summary, not legal advice. Check the rule, or your state plan, for your own products.

SOPs for cleaners who speak another language

Many cleaning teams speak Spanish, Portuguese or another language first. Write short steps, one action in each step, and put a photo next to each standard. Translate the SOP, and keep the photos the same in each language. Read how to give photo cleaning instructions and the Brazilian Portuguese cleaning vocabulary.

A turnover and a deep clean need different SOPs, because a deep clean adds work that a turnover skips. Read turnover clean vs deep clean.

How to know that the SOP is followed

An SOP only works when somebody checks the result. The usual check is an inspector who visits some of the cleans. But an inspector cannot visit every clean, and the clean that nobody checks is the one the client complains about. The photos from each clean are the record. The question is who looks at them. RapidEye does: it checks the photos your cleaners already take, or a short video walkthrough, against your checklist and the property's own baseline, and returns the missed steps, damage, and items that are missing or moved, so you see where the SOP was not followed before your client does.


Quick FAQ

What does SOP stand for in cleaning?

SOP stands for standard operating procedure. In cleaning, an SOP is a written document that tells a cleaner how to do one kind of clean, step by step, so that every cleaner does it the same way and gets the same result.

What is the difference between a cleaning SOP and a cleaning checklist?

The SOP tells the cleaner how to do the work: the order, the supplies, the safety rules and the standard for done. The checklist is the short list that the cleaner ticks on the job to show that each step is done. Write the SOP first, then make the checklist from it. For a sample checklist, read the turnover cleaning checklist.

How long should a cleaning SOP be?

As short as possible. One page for each area or type of clean is enough for most teams. Use short steps and photos of the correct result. A long SOP that nobody reads does not change the work.

Do cleaning companies need safety data sheets for their products?

Under the OSHA Hazard Communication Standard, an employer keeps a safety data sheet for each hazardous chemical and makes it readily accessible to employees during each work shift. When work is done at more than one location, the sheets may be kept at the primary workplace if employees can get the information immediately in an emergency. Some consumer products used the way a consumer uses them are exempt. Check the rule for your products.

How often should I update a cleaning SOP?

Update it when something changes: a new client rule, a new product, a repeat miss or a complaint. Review each client page at least when the contract renews. Tell the team what changed, and show them the new photo of the correct result.

Sources

Sources are named at the publisher level with their root domain, rather than linked or titled; every figure is verifiable at the named source.

  1. Hazard Communication Standard, 29 CFR 1910.1200, Electronic Code of Federal Regulationsecfr.gov
  2. Checklist template documentation, Breezeway Help Centerbreezeway.io

Keep reading