To clean a check out room, you clean it fully for a new guest, in a fixed order. Knock and enter. Check the room for items left behind and for damage. Strip the bed and remove linen, towels and trash. Make the bed, dust from high to low, clean and disinfect the bathroom, restock, and vacuum toward the door. Do a final check, report the room as clean, and the supervisor inspects it.

What a check out room is

A check out room (also called a departure room or C/O) is a room that the guest has left. The guest has returned the key and paid the bill. The room status is now vacant dirty. It cannot be sold until it is cleaned and checked. Read hotel room status codes for the full cycle.

When a guest checks out, the hotel software also clears the guest's requests for that room. According to Oracle's OPERA Cloud documentation (docs.oracle.com), check out removes the Do Not Disturb, Make Up Room and Service Declined statuses. So the room attendant sees a clean slate for the next guest.

The 12 steps

Your hotel has its own standard. The order below is the common one. The rule behind it is simple: work from clean to dirty and from high to low, so that dust and dirt never fall on a surface that you already cleaned.

Before
1
Prepare your cart
Load clean linen, towels, guest supplies, amenities, cleaning chemicals and cloths. Park the cart in front of the door so that it blocks the doorway.
2
Knock and announce
Knock, say "Housekeeping", and wait. Knock and announce again. Then open the door slowly. If a guest is inside, say sorry and come back later.
Check
3
Open up and look
Open the curtains and turn on the lights. Look for items the guest left, damage, stains and minibar use. Report them now, before you clean. After cleaning, nobody can prove when the damage happened.
Strip
4
Strip the bed and remove towels
Take off all used linen and towels. Check the mattress protector for stains. Never shake linen.
5
Empty the trash
Empty every bin, including the bathroom. Take out used cups and dishes.
Clean
6
Make the bed
Use fresh linen to the hotel standard. Making the bed first stops dust from the bed falling on surfaces you clean later.
7
Dust from high to low
Start at the top (lamps, frames, shelves) and finish at the bottom (skirting, under the bed). Wipe the high-touch points: switches, handles, remote control, phone.
8
Clean, then disinfect, the bathroom
Clean the dirt away first. Then apply the disinfectant and leave it on for the contact time on the label. Clean the toilet last, with its own cloth.
Restock
9
Replace supplies and amenities
Put fresh towels, toilet paper, glasses and amenities in their standard positions. Read amenities in housekeeping.
10
Vacuum toward the door
Start at the far side of the room and finish at the door, so that you do not walk on the clean floor.
Finish
11
Do a final check from the door
Look at the room as the guest will. Set the curtains, lights and air conditioning to the standard. Check that the door locks behind you.
12
Report the room as clean
Update the status in the system or on the room list. The supervisor inspects the room and then marks it ready for the front desk.

Step 8 in detail: clean first, then disinfect

Many trainees spray disinfectant and wipe it off at once. That does not work well. The US Environmental Protection Agency (epa.gov) gives two rules for disinfectant use:

  • Pre-clean. Wash the surface first if it is visibly dirty or if the label says to pre-clean.
  • Keep it wet for the contact time. The contact time is on the label. The surface should stay visibly wet for all of that time. The EPA example: for a 10 minute contact time, the surface should stay wet for at least 10 minutes, and you add more product if it dries.

So spray the disinfectant first, then do other work in the bathroom while it acts. Wipe it at the end.

Check out room vs stay over room

Check out room

  • The guest has left.
  • Change all linen and towels.
  • Clean every surface, inside drawers too.
  • Restock every item.
  • Supervisor inspects before the next guest.

Stay over room

  • The same guest stays another night.
  • Change linen as the hotel policy says.
  • Tidy and clean, but do not move the guest's things.
  • Replace used items only.
  • Respect DND and service declined.

After step 12: the inspection

The supervisor's check is the last gate before a new guest. The US Department of Labor's job data for housekeeping supervisors lists two tasks for this. According to O*NET (onetonline.org), supervisors "inspect work performed to ensure that it meets specifications and established standards", and "advise managers, desk clerks, or admitting personnel of rooms ready for occupancy".

In a busy hotel, one supervisor cannot inspect every check out room in time. So some rooms go to guests with no second check. Those rooms carry the missed hair in the shower, the empty shampoo, or the damage from the last guest that nobody reported. RapidEye gives every check out room that second check: it reviews the photos and video that housekeeping already takes and returns missed cleaning, damage, missing items and standards not met, not only for the rooms a supervisor has time to see. Read how to inspect more hotel rooms without more supervisors.


Quick FAQ

What is a check out room in a hotel?

A check out room, also called a departure room, is a room that the guest has left for the last time. The guest has returned the key and settled the bill. The room is vacant and dirty, and it needs a full clean before the hotel can sell it to the next guest.

What is the procedure for cleaning a check out room?

Knock and announce yourself, then enter. Open the curtains, check the room for items left behind and for damage, strip the bed and remove used linen, towels and trash. Make the bed with fresh linen, dust from high to low, clean and disinfect the bathroom, restock supplies and amenities, vacuum toward the door, do a final check and report the room as clean. The supervisor then inspects it.

What is the difference between a check out room and a stay over room?

A check out room gets a full clean, with all linen changed, every surface cleaned and every item restocked, because a new guest will arrive. A stay over room is still in use by the same guest. It gets a lighter service, and the attendant does not move the guest's belongings.

Why do you clean before you disinfect?

Dirt can stop a disinfectant from working. The US EPA says to pre-clean a surface that is visibly dirty, then apply the disinfectant and keep the surface wet for the contact time on the label.

What should a room attendant do with items left in a check out room?

Do not keep or throw away anything that may belong to a guest. Record the item, the room number, the date and the time, and give it to the housekeeping desk for lost and found. Report any damage to the supervisor at the same time.

Sources

Sources are named at the publisher level with their root domain, rather than linked or titled; every figure is verifiable at the named source.

  1. OPERA Cloud housekeeping documentation, Oracle Hospitalitydocs.oracle.com
  2. Guidance on disinfectant use and contact time, US Environmental Protection Agencyepa.gov
  3. Occupation data for supervisors of housekeeping workers, O*NET, US Department of Laboronetonline.org

Keep reading